» By adopting 220V DC motor with characteristics of Low speed of revolution an
high torque the machine can realize stable machining in superior performance.
» No vibration in axial travel and cutting process.
» Feeding and processing can realize unlimited speed control. Feeding process can be set according to requests, and processing can automatically stop after reaching the limit switches.
» Boring bar adopted high-strength alloy which with high hardness, high accuracy, high tenacity, good abrasion resistance, etc.
» Within the effective travel, the tool rest can be fixed at any position of boring bar.
» The boring bar can be disassembled separately to make installation convenient.
» Electric motor controller is equipped with a dynamic delay brake program to avoid vibration in shutdown.
» The control cabinet is installed below the main engine to be beneficial to safety operation.
» The equipment also has extended functions on boring end face. Customers can select the function according to processing demands.
|Boring Bar Diameter||mm||40|
|2||Length of Boring Bar||mm||1500mm|
|3||Boring Spindle Speed||RPM||0-125
Suggested 50rpm when using HSS Tool
|4||Max Axial Travel||mm||360|
|5||Axial Feeding Speed||mm/r||0-0.8|
|7||Boring Diameter||mm||Φ45-Φ180(Max 200)|
|8||The Maximum Boring Depth||mm||2mm on one side(Φ45-180)|
|1mm on one side (φ180-200)|
|10||Machining Tolerance||mm||Less than 0.1|
|11||Voltage and Frequency||-||220V, 50hz, Single Phase|