Standard, Deep and Thinwall Sockets
Up to 3.1/2" square drive Impact Sockets through to 235MM (9.1/8") across the flats
# 5 spline drive to 80mm (4") across the flats
Wide variety of Accessories
The Freecorner profile is provided on the square drives as well as on the hexagon end of Impact Sockets 1/2" square drive and above.
Corner point contact high stress areas
Highlights show contact points on the corner of the fastener
Distributed surface loads relieves possible stress area
Highlights show contact points away from the corner of the fastener
Reduced risk of fastener rounding.
Increased chances of turning worn fasteners.
Elimination of high stress concentration points increasing the impact resistance and the torque transmitting capability.
All Impact Sockets are made from high strength alloy steel.
All Impact Sockets are heat treated for the best combination of strength and impact resistance.
All Impact Sockets have an optimum wall thickness for strength and access on fasteners having restrictions.
The depth of the Hex openings is designed to accomodate the full standard fastener head.
All Impact Sockets have chamfered openings for ease in engagement with the drive tool and the fastener.
Concentric openings and large clearance holes to meet industrial specifications.
All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive.
Sockets are plated and black oxidized coated for increased protection from rusting.
Always use safety goggles when using impact equipment.